SEO

MGN12H 300mm: Ordering a Miniature Rail to Length

A buyer's guide to decoding the MGN12H 300mm specification and turning it into a complete order: rail size, carriage type, length, material, accuracy grade, preload, quantity and supply options for the MGN12 miniature linear rail.

Order Specification Guide

When a buyer searches for MGN12H 300mm, the query already fixes three things: a 12 mm rail width, an MGN-H long carriage, and a 300 mm rail length. What is still open is everything else a supplier needs before the order can be priced and manufactured. This guide decodes each part of the model code and shows how to write the remaining variables into a complete specification against the MGN12 miniature linear rail.

Key takeaways

  • The code splits into rail size (12 mm), carriage type (H, long) and rail length (300 mm).
  • An order also needs material, accuracy grade, preload and quantity, which the size/length query does not carry.
  • The MGN series covers sizes 9, 12 and 15, with MGN-C standard and MGN-H long carriages.
  • MGN12C rated dynamic load of 3.7 kN and static load of 5.4 kN belong to the C carriage, not to the H type.
  • Rails ship pre-lubricated; re-grease every 3–6 months or about 100 km of indoor use.

Decoding MGN12H 300mm

Each element of the string answers a manufacturing question:

Model code breakdown
SegmentMeaningDesign implication
MGNMiniature linear guide seriesThe series spans sizes 9, 12 and 15; this is the miniature profile family.
1212 mm rail widthSets the profile class and matching carriage size.
HLong carriageLonger carriage body than the standard C type; check the datasheet for exact body dimensions.
300mmRail lengthThe rail is cut to 300 mm; confirm end-machining reach and hole pattern from the drawing.

The MGN series uses a two-row Gothic-arch ball circuit that carries load equally in four directions. Carriage types are MGN-C (standard) and MGN-H (long). The exact external dimensions of the MGN12H carriage and the 300 mm rail’s hole positions are not reproduced here; request the datasheet PDF and use it to check the mounting interface against your design before ordering.

What a full order specification needs

A length-and-size query becomes an order only when every variable below is stated. Present these to the supplier as a single checklist:

  • Rail size: 12 (MGN12).
  • Carriage type: C or H β€” you have asked for H, the long carriage.
  • Rail length: 300 mm.
  • Quantity: number of rails and carriages per rail.
  • Material: standard 9Cr18Mo martensitic stainless steel, or GCr15 chrome steel for indoor cost-sensitive use.
  • Accuracy grade: standard (running parallelism approx. 0.02 mm/300 mm) or P grade (0.01 mm/300 mm or better).
  • Preload: light or medium; medium is typical for CNC applications.
  • Seals: standard end seals included; side scraper seals optional.

Missing any one of these leaves the supplier guessing on either machining, assembly or inspection, and the quotation will come back with assumptions you then have to check.

Material choice: stainless versus chrome steel

The standard material for the MGN series is 9Cr18Mo martensitic stainless steel with a hardness of HRC 54–58. GCr15 chrome steel is offered as an option at HRC 58–62 for indoor, cost-sensitive use. The two differ in hardness and in the environment they suit: stainless covers exposed and moist conditions, while chrome steel is a practical choice where the machine operates indoors and the bearing duty is the priority. State the material explicitly in the order; do not leave it to be inferred from the price.

Accuracy grade and preload

Accuracy grade sets the running parallelism tolerance over a stated length. Standard grade gives approximately 0.02 mm per 300 mm; P grade gives 0.01 mm per 300 mm or better. Because your rail is exactly 300 mm, the quoted tolerance applies directly to the full rail, not to a scaled segment β€” a specific example of why stating grade matters for a to-length order.

Preload is a separate decision from grade. Light preload and medium preload are the two options; medium is typical for CNC applications where stiffness matters. Preload choice affects the running feel and the load the carriage carries, so specify it together with the accuracy grade rather than after the fact.

Variables to specify at order
VariableOptionsWhy it matters
Material9Cr18Mo stainless (HRC 54–58); GCr15 chrome steel (HRC 58–62)Hardness and environment suitability.
Accuracy gradeStandard ~0.02 mm/300 mm; P grade 0.01 mm/300 mm or betterRunning parallelism at the stated length.
PreloadLight or mediumStiffness and running feel; medium typical for CNC.
SealsStandard end seals; optional side scraperContamination defence on the carriage.

On the load rating, be careful with the figure: the published datasheet gives the MGN12C carriage a dynamic load of 3.7 kN and a static load of 5.4 kN. Those values belong to the C carriage. Do not assume the H carriage shares them; ask the supplier for the MGN12H rating in writing when load capacity is part of your design margin.

Rail length limits and splicing

A 300 mm rail is a straightforward single-piece length: the maximum single rail length is 1000 mm, with splicing available for longer runs. Friction coefficient is 0.002–0.004. For a to-length order, confirm the end-machining and mounting-hole pattern against the datasheet, since the length is fixed but the interface still has to match your plate or extrusion.

Quantities, samples and supply

The minimum order quantity is 50 pieces per size. If you are evaluating the MGN12H before committing, sample sets of 5–10 pieces are available. Rails ship pre-lubricated; plan for re-greasing every 3–6 months or roughly every 100 km of indoor use, whichever comes first for your duty cycle. These supply terms are worth confirming alongside your specification, because they determine how a trial order and a production order differ in scope.

Two product pages give the starting point for the specification: the MGN12 linear rail and the broader MGN series stainless steel miniature linear guide. The datasheet PDF for MGN12H and its 300 mm rail is available on request and should be the reference for the mounting interface.

What to expect in the quotation

Lead time and price for an MGN12H 300 mm order are not fixed by the specification alone β€” they depend on material, grade, preload and quantity, and are confirmed in the quotation. When the quotation arrives, check that it repeats each checklist variable back to you: size 12, carriage H, length 300 mm, quantity, material, accuracy grade, preload and seal options. A quotation that omits one of these has left a variable open, and the open variable is where a later dispute usually starts.

If the load capacity of the H carriage matters to your design, ask for the MGN12H rating separately from the MGN12C figures above. With the datasheet, the checklist and a quotation that mirrors the specification, the order is closed on stated terms rather than assumptions.